Milling unit D40 with integrated C-axis and up to 40 kW power (S1) positioned- and clamped P-Version continous controlled C-Version.
Droop+Rein TS/TFS NEO
6-axis machining center
Flexibility, efficiency and precision play a very important role for machine manufacturers and tool builders, especially when dealing with large components. These three requirements led to the development of the gantry machining centre TS/TFS NEO with a fixed and movable crossbeam, whereby the customer chooses the table designs, controls and milling units suitable for them on a modular basis. The TS/TFS NEO features a new milling unit and a modified C-axis (±400°) which, thanks to its enormous flexibility, can be used for efficient production of highly precise machine parts.
The large number of automatically changeable milling heads increases the machine's flexibility within its scope of application.
The TFS also allows automatic tool or spindle changing and tool or workpiece measurement.
As tool interfaces it offers SK 50, HSK-A100 and HSK A63.
It offers automatic tool measuring and part probing.
The series offers different tool magazine solutions likechain type magazines with up to 80 pockets or robot supported tool magazines with up to 320 pockets.
- Double pinion, electronically preloaded by two feed drives
- High stiffness
- High position accuracy
- Easy maintenance by reduced numbers of drive elements.
Self manufactured fork type head for 3+2 axis machining in P-Version or five axis machining in C-version.
The series offers the Heidenhain iTNC 530 or Siemens Sinumerik 840 D control.
An automatic attachment changer offers 6 pockets for differents head attachments like special milling heads or motor spindles.
The TFS offers a wide variety of different table configurations like single-, double-, round-, rotating-, and pallet table.
The TFS offers a wide variety of different milling heads for multiple milling operations.
|Power (100% DC)||kW||40|
|Torque||Nm||700 - 1,800|
|Speed||rpm||4,000 - 6,000|
|Length||mm||2,000 - 5,000 mm + 1,000 mm steps|
|Width||mm||2,000 - 3,000 mm + 500 mm steps|
|X-axis||mm||3,000 - 6,000|
|Y-axis||mm||3,000 - 4,000|
|Z-axis||mm||1,500 - 2,500|
|W-axis||mm||1,250 mm (only for TS)|
|C-axis||°||± 200/± 400/n x 360|
|W-axis||m/min||4 m/min (only for TS)|