ECOSPEED F 2035

ECOSPEED F 2035

Unique drive concept due to parallel kinematic machining head Sprint Z3

No manual rework required due to high machining quality and outstanding surface quality

Rapid cutting of workpieces through full 5-axis machining and excellent acceleration in all axes

5-axis machining center

Scharmann has developed the ECOSPEED F for high-speed machining of mediumsized aluminium structural components. The horizontal spindle arrangement, the vertical pallet arrangement and the Sprint Z3 parallel kinematic machining head, which delivers high travel speeds (50 m/min) and accelerations (9.81 m/s²), all come from the successful ECOSPEED.

What sets the F version apart from the standard ECOSPEED is that the machine column is stationary. The pallet travels in the X direction on the vertically arranged table group. The ECOSPEED F is equipped with a rotating double pallet station, located parallel to the X-axis, which enables component loading and unloading during the machining cycle.

Axis configuration

Innovative Solutions

Sprint Z3 and the parallel kinematic concept: Three parallel linear axis drives are mounted radially equispaced in a barrel-shaped headstock. The spindle platform is connected to each drive by means of rigid levers with a simple pivot at one end, and a ball joint at the other end. A high performance motor spindle is mounted to the spindle platform.

The machine provides different tool magazines like chain magazines with up to 80 pockets and rack type magazines with up to 129 pockets.

HSK A63/80 tool taper with 80 mm flange size and 21 kN clamping force.

A conical working envelope of +- 45° of the A- and B- axis Highly dynamic 5-axis simultaneous machining.

The high performance spindle offers 30,000 rpm at 120 kW (S1) power and 83 Nm (S1) torque.

Siemens 840 D with Operate

Ergonomic part loading in horizontal position.

The machine can be equipped with a pallet system. Also a flexible manucaturing system is possible.

Automatic change of head attachments like angular milling heads.

The machine concept is valid as the world's most productive solution for the machining of aluminum structural parts at highest surface finish quality.

High acceleration / deceleration of 1 G in all axes.

Due to proven components the machine offers much higher availability as traditional machine concepts.

Technical Data

Length (X-axis) mm 3,500
Width (Y-axis) mm 2,000
Payload kg 3,000
X-axis mm 3,800
Y-axis mm 2,500
Z-axis (spindle horizontal pos.) mm 670
Z-axis (spindle +/- 45°) mm 370
A/B-axis, conical work envelope ° A/B-axis, conical work envelope
Pallet changing time (definend cycle) sec 184
Chip to chip time (definend cycle) sec 13
Acceleration / deceleration in X-axis m/s2 9.81
Acceleration / deceleration in Y-axis m/s2 9.81
Acceleration / deceleration in Z-axis m/s2 9.81
Acceleration / deceleration in A- and B-axis °/s2 685
Rapid traverse / feed in X-axis m/min max. 50
Rapid traverse / feed in Y-axis m/min max. 50
Rapid traverse / feed in Z-axis m/min max. 50
Tool magazine WERO rack type 129 / 300 pockets
C-axis ° 360 continuous
Right angular milling head (spindle 90° +/- 45°)
Right angular drilling head (spindle 90° +/- 45°)

ECOSPEED F

Wing ribs demand additional ECOSPEED'S

Read success story

ECOSPEED

Optimum machine dynamics for machining aluminium

Read success story

User report Magellan

ECOSPEED - Optimised production of wing ribs at Magellan

Read success story

ECOSPEED manufacturing system

Production of wing ribs for Airbus

Read success story

Service Plus Package

Perfect service for perfect machines

Precondition for above-average productivity, efficiency and economy is a constant high availability of the machine. And necessary for this above all, besides innovative technology, is: A tailored service, which is perfectly coordinated to your individual requirements.

ServicePlus guarantees you machine availabilities of at least 95%!

Troubleshooting

Our call center staff immediately understands your service requirements and passes them on quickly and appropriately to our technical hotline or to the appropriate service advisor.

Starrag Hotline: +49 371 836 23 68

All Service Products

Spindle overhaul

Overhaul concepts tailored optimally to your requirements

Training courses

Efficient machine operation thanks to optimal training courses

Replacement parts

Fast and reliable supply of replacement parts due to global logistics network

Maintenance

High technical availability through preventive maintenance

Service near you

Time is money! That also applies when it concerns the service and maintenance of your machine. The Starrag Service and Logistics Centres near you have the necessary infrastructure, in order to guarantee you perfect service.

Service Contact

Partnering for Efficiency

Service Plus

Brochure download

I have been informed that I can withdraw my consent to the processing of my personal data at any time. Withdrawal shall not affect the legality of any data processing already carried out before withdrawing my consent. By providing my consent, I confirm that I am aged 16 years or older. I hereby consent to the processing of my data. I give my consent voluntarily. I know that this declaration of consent will be saved.
I have been informed that I can withdraw my consent to the processing of my personal data at any time. Withdrawal shall not affect the legality of any data processing already carried out before withdrawing my consent. By providing my consent, I confirm that I am aged 16 years or older. I hereby consent to the processing of my data. I give my consent voluntarily. I know that this declaration of consent will be saved.