Heckert Large Athletic Series

Go Back
Heckert Large Athletic Series

by accelerating your manufacturing processes thanks to complete machining in a single set-up.

by keeping your non-productive time – such as tool change, spindle speed-up, pallet changing and B-axis positioning – to a minimum, resulting in faster turnaround times and increased productivity.

thanks to the high rigidity of our machines. This ensures the highest quality and productivity over decades and it allows you to increase chip removal, which reduces your cutting time.


Huge, modular and flexible

The flexible and modular-designed Heckert Large Athletic Series guarantee optimum results in the economic processing of large-sized and heavy workpieces with an edge length of up to 3,300 mm and up to 13,000 kg in all material qualities.

Available in 4- and 5-axis versions


Workpiece sizes 4-axis & 5-axis models

Heckert HEC 1000

Heckert HEC 1250

Heckert HEC 1600

Heckert HEC 1800


  • Steelwelded crossbed
  • High level of rigidity, damping and long-term stability
  • Perfect chip disposal, even for dry machining
  • FANUC 31i
  • Available as an option
  • Water-cooled main drive and feed motors
  • Cooled ball screw with tempered feed bearings
  • Thermally insulated machine base and column
  • Maximum precision for machine pallets
  • Wide selection of hole matrix and T-slot pallets
  • Set-up during machining time
  • Offered in double, triple or quadruple design
  • Safety light barrier in front of load-unload station
  • Chain and tower magazines are available
  • Up to 450 tools
  • Individually configurable
  • Ergonomic loading and unloading
  • 340 mm max. tool diameter, 950 mm with T-type tools
  • 800 mm max. tool length
  • Up to 1,500 Nm torque
  • Up to 12,500 rpm
  • Up to 84 kW drive power
  • Thermo-symmetrical design
  • High level of rigidity
  • Perfect chip disposal, even for dry machining
  • Available as an option
  • Up to 5,000 rpm
  • 760 mm adjustable length
  • Diameters of 125 mm or 150 mm
  • Available as an option
  • NC rotary table with 400 rpm
  • Unbalance detection
  • 5-side machining in one clamping
  • Maximum dynamics in positioning mode and simultanious operation
  • High rotational accuracy through 4-fold precision bearing
  • Optimal machining with max. 67 kW and up to 8,000 rpm
  • Serrated ring couplings guarantee highly precise swivel position
  • Automatic compensation of axial spindle extension under heat and sag compensation

从简单的零件存储到最复杂的柔性制造系统——甚至是最大的机器。 斯达拉格集团使工业 4.0 成为现实. 阅读更多


Pallet clamping area mm 1,000 x 800
Max. load kg 4,000
Max. speed rpm 10
Workpiece swing diameter mm 1,700 (1,900)
Max. workpiece and clamping fixture height mm 1,650
Linear travel X mm 1,700
Vertical travel Y mm depending on support to 1,600
Traverse travel Z mm 1,850
Feed range, stepless mm/min 1 ... 45,000
Rapid traverse rate X / Y / Z m/min 45 (60)
Feed force X / Y / Z kN 20
H spindle .
Drive power 100% c.d.f. kW 29
Drive power 25% c.d.f. kW 55
Torque 100% c.d.f. Nm 936
Torque 25% c.d.f. Nm 1,500
Speed range, stepless rpm 20 ... 6,000
Tool taper SK 50 (HSK-A 100)
HV spindle .
Drive power 100% c.d.f. kW 29
Drive power 60% c.d.f. kW 30
Torque 100% c.d.f. Nm 985
Torque 60% c.d.f. kW 1,088
Speed range, stepless rpm 20 ... 6,000
Tool taper SK 50 (HSK-A 100)
P 125 .
Quill diameter mm 125
Drive power 100% c.d.f. kW 29
Drive power 25% c.d.f. kW 55
Torque 100% c.d.f. Nm 1,300
Torque 25% c.d.f. Nm 2,470
Speed range, stepless rpm 20 ... 4,000
Tool taper SK 50 (HSK-A 100)
Chain magazine .
Number of tool pockets 40 (60 / 80 / 120)
Max. tool diameter mm 325
Max. T-type tool diameter mm 500
Max. tool length mm 800
Max. tool weight kg 35
Tower magazine .
Number of tool pockets 180 (270 / 360 / 450)
Max. tool diameter mm 340
Max. T-type tool diameter mm 950
Max toll length mm 450 / 800
Max. tool weight kg 35 (50)
Total weight of all tools per tower kg 900
Linear axes X / Y / Z
Positioning deviation P [Tp] mm ≤ 0.006
Repeatability Psmax mm ≤ 0.004
NC rotary table B
Positioning deviation P [Tp] sec ≤ 6
Repeatability Psmax sec ≤ 4




Innovative products through innovative production

Milling / turning center enables the complete machining of complex pump parts


Speed, precision and long-term process reliability


Flexibility conquered the market

Modern crankshaft production takes place on machining centers of the Starrag Group


Higher productivity with flexible manufacturing

Heckert HEC 630 heavy-duty cutting convinces medium-sized enterprises


No compromise on quality


Huge precision

Heckert large machining centres in moulding


Four Heckert machining centres for burner housing production at Weishaupt


When it gets really big


Productive single-item production

Milling / turning center realizes savings of up to 65 percent


Higher profitability per square metre

New HEC machining centres from Starrag Group modernise demanding cast processing


ServicePlus 服务包



ServicePlus 可以确保您的机床可用性达到 95% 以上!



Starrag 热线:400 820 9808











时间就是金钱! 这同样适用于和您机床相关的维修和保养。您身边的 Starrag 服务和物流中心配备完善的基础设施,以保证您的完美服务。