- Maintenance-free cover concept with fixed sheet steel panels
- High level of rigidity and damping
- Direct chip disposal, even for dry machining
Heckert H 系列
归因于机床占地面积小且能效高
我们通过缩短刀具更换、主轴加速、托盘更换和B轴定位时间等一系列方法降低非生产时间，从而提高生产效率
取决于机床的超高刚性，数十年如一日地确保最优的质量和最高的生产率。同时可以提高排屑量，降低切削时间。
工作空间大，占地面积小
该系列四轴卧式加工中心创造了节省空间的奇迹，每一处细节严格遵守斯达拉格的质量标准，保证加工过程达到最高精度——这一点得益于斯达拉格对精度和刚性的价值指引。这也正是海科特加工中心长久以来秉持的价值观。
轴结构
创新技术解决方案
- Footprint reduced by 38%
- Periferical units are fully integrated
- Thermo-symmetrical design
- High level of rigidity
- Direct chip disposal, even for dry machining
- Optimised for dynamic machining
- Up to 350 Nm torque
- Up to 20,000 rpm
- Extremely short speed-up time with HSK-A63
- Up to 450 tools
- Individually configurable
- Ergonomic loading and unloading
- Also with tool identification
- 9-second pallet change time
- Set-up during machining time
- Automatic loading doors (option)
- 13-channel hydraulic clamping unit
- Maximum precision for machine pallets
- Individually adaptable
Heckert H40 / H50 / H 60: Designed to your benefit
The basic modular concept of the new Heckert machining centres offers maximum efficiency even with a standard configuration. And that's no coincidence, since a consistent increase in added value for the customer was essential for the development of each individual assembly.
技术参数
| X / Y / Z travel | mm | 560/650/680 |
| Rapid traverse | m/min | 80 |
| X/Y/Z acceleration | m/s2 | 9/12/8 |
| Chip-to-chip time | sec | 2.5 |
| Tool holder | HSK-A63 | |
| Max. tool length | mm | 350 |
| Max. tool diameter | mm | 160 |
| Pallet dimension | mm | 400 x 400 (400 x 500) |
| Time required to change pallets | sec | 9 |
| Workpiece core contour | ø in mm | 650 |
| Extended workpiece contour | ø in mm | 720 |
| Max. workpiece height | mm | 900 |
| Loading mass | kg | 600 |
| Machine length | mm | 6,800 |
| Machine width | mm | 2,670 |
| X / Y / Z travel | mm | 700/750/780 |
| Rapid traverse | m/min | 80 |
| X/Y/Z acceleration | m/s2 | 9/12/8 |
| Chip-to-chip time | sec | 2.7 |
| Tool holder | HSK-A63 | |
| Max. tool length | mm | 430 |
| Max. tool diameter | mm | 160 |
| Pallet dimension | mm | 500 x 500 (500 x 630) |
| Time required to change pallets | sec | 9.5 |
| Workpiece core contour | ø in mm | 750 |
| Extended workpiece contour | ø in mm | 850 |
| Max. workpiece height | mm | 900 |
| Loading mass | kg | 800 |
| Machine length | mm | 6,800 |
| Machine width | mm | 2,760 |
| X / Y / Z travel | mm | 700/750/780 |
| Rapid traverse | m/min | 80 |
| X/Y/Z acceleration | m/s2 | 6/11/8 |
| Chip-to-chip time | sec | 2.9 |
| Tool holder | HSK-A100 | |
| Max. tool length | mm | 430 |
| Max. tool diameter | mm | 220 |
| Pallet dimension | mm | 500 x 500 (500 x 630) |
| Time required to change pallets | sec | 9.5 |
| Workpiece core contour | ø in mm | 750 |
| Extended workpiece contour | ø in mm | 850 |
| Max. workpiece height | mm | 900 |
| Loading mass | kg | 800 |
| Machine length | mm | 6,800 |
| Machine width | mm | 2,960 |
| X / Y / Z travel | mm | 850/1020/1000 |
| Rapid traverse | m/min | 80 |
| X/Y/Z acceleration | m/s2 | 6.5/10/7 |
| Chip-to-chip time | sec | 2.9 |
| Tool holder | HSK-A63 | |
| Max. tool length | mm | 430 |
| Max. tool diameter | mm | 160 |
| Pallet dimension | mm | 500 x 630 |
| Time required to change pallets | sec | 11.5 |
| Workpiece core contour | ø in mm | 1000 |
| Extended workpiece contour | ø in mm | 1,350 |
| Max. workpiece height | mm | 1,050 |
| Loading mass | kg | 1,000 |
| Machine length | mm | 7,950 |
| Machine width | mm | 3,300 |
| X / Y / Z travel | mm | 850/1020/1000 |
| Rapid traverse | m/min | 80 |
| X/Y/Z acceleration | m/s2 | 6/10/7 |
| Chip-to-chip time | sec | 3.1 |
| Tool holder | HSK-A100 | |
| Max. tool length | mm | 600 |
| Max. tool diameter | mm | 340 |
| Pallet dimension | mm | 500 x 630 |
| Time required to change pallets | sec | 14 |
| Workpiece core contour | ø in mm | 1000 |
| Extended workpiece contour | ø in mm | 1,350 |
| Max. workpiece height | mm | 1,130 |
| Loading mass | kg | 1,500 |
| Machine length | mm | 7,630 |
| Machine width | mm | 3,300 |
| X / Y / Z travel | mm | 1000/950/1000 |
| Rapid traverse | m/min | 65 |
| X/Y/Z acceleration | m/s2 | 7/7/7 |
| Chip-to-chip time | sec | 4.4 |
| Tool holder | HSK-A100 | |
| Max. tool length | mm | 600 |
| Max. tool diameter | mm | 340 |
| Pallet dimension | mm | 630 x 630 |
| Time required to change pallets | sec | 14 |
| Workpiece core contour | ø in mm | 1000 |
| Extended workpiece contour | ø in mm | 1,350 |
| Max. workpiece height | mm | 1,130 |
| Loading mass | kg | 1,500 |
| Machine length | mm | 7,630 |
| Machine width | mm | 3,860 |
Always on our radar: user friendliness
Manufacturing solutions are growing increasingly complex, and it's becoming harder than ever to find operators who have the skills to handle them. With this in mind, our job is to simplify the operation of our machines and tailor it to your idea of what an operator should do.
The human-machine interface (HMI) is the point where a machine and its operator interact. Intuitive user guidance and clear communication are the keys to a secure manufacturing process. In the design of the HMI this was the basis - both in terms of ergonomics, interactivity and flexibility, as well as the user interface. We took the modern, intuitive operating concepts of smartphones and tablets as our starting point.
You can choose to configure your machine with premium-class Siemens or FANUC control system.
Individual automation add-ons
They allow you to make optimum use of your machines and increase productivity. You can win back the valuable minutes previously lost on machine loading. This increases throughput and reduces production costs.
We offer you automation solutions in various forms. Be it a fully adaptable linear pallet storage system, a robot cell or our fully integrated pallet storage Heckert PS800/6.
