Bumotec s230

Tool holder magazine
The 8 positions tool holder magazine allows the automatic tools loading in the vertical spindle for milling, machining contour or engraving. The loading process is done automatically by the pneumatic clamping. The production of complex parts or the use of brother‘s tools is possible.

Diamond tool
A wide variety of standard tools are available on the market for all types of forms.
        
Tools preparation
Tools preparation takes place outside the machine on a setting table.
The measuring microscope allows quick and accurate mounting of the tools.

Tools setting
The lateral alignment of the tool is performed by micrometer screw adjustment and the tool height by an eccentric screw.

Angular adjustment
The fine adjustment of the cutting angles is performed by micrometer screws.

Revolver tool holders 2 positions, ø 300 mm
The use of a large diameter tool holder insures a high gloss finishing surface.

Revolver tool holders 6 positions, ø 180 mm and ø 150 mm
During the machining process the indexing from one to the other six positions of tool holder is performed automatically by programming choices.

Simple tool holder, ø 20 mm
The tool holder ø 20 mm allow the use of smaller radius tools to achieve other brilliance effects.

• High precision pallets
• Universal vacuum pallets 
• Automation unit for high autonomy

High precision clamping
The high precision clamping system insures the repeatability of precise clamping in μ.
The repeatability of the clamping pallet allows visual inspections during the machining process. Systèms3R, Erowa, Yerly or other systems can be adapted.

Pneumatic clamping
The universal vacuum system of pallets ensures the angular positioning by pins keying. The optical camera system takes care of the individual positioning of each index.

Height probe
The control of the pallets height is checked before the machining process. A new Z origin is then defined and recorded.

1 Optical recognition and origin definition of blanks
Optical recognition of forms and positions
The target position of each index on the X,Y axes and angle C is programmed in the matrix management.

Automatic correction
The optical camera determines the actual positon of the index edges in X, Y and C in order to determine a new origin for each form in a precision better than 0.01 mm.

2 Diamond with the revolver tool holder
Side diamond
Longitudinal diamond

3 Machining of LumiNova pockets and micro milling

Contour milling
The index contour is machined with the high frequency vertical spindle.

Luminova pocket
The location for the reception of the LumiNova luminous paste is machined by the high frequency spindle with if necessary corner lifts to ensure a minimum radius.

Everything from simply part storage to most complex flexible manufacturing systems – even of the largest machines. The Starrag Group makes Industry 4.0 a reality. Read more